Jaw Crushers
Jaw crushers are the primary crushers that
can break stone in every set thanks to their
strong designs. Jaw crushers are used as the
most important option for the primary
crushing operations of medium hard and hard
stones. There are also secondary type jaw
crushers designed for secondary crushing of
hard materials.
Jaw crushers are used to break the rock and
creek gravel. Thanks to the camshaft, the
jaw crusher function is made possible by the
oscillating jaw. The material breaks down as
the moving jaw approaches the stationary jaw
as the material flows from the feed opening
into the discharge opening. The discharge
opening is adjustable so that different
sizes of crushed material can be obtained
depending on the requirements. Jaw crusher
is working with electric motor and belt-pulley.
General features
• Welding construction body
• High performance
• Easy and secure jaw adjustment system
• Easy and fast maintenance
• Ease of installation
• Ease of operation
Jaw Crushers are primary and secondary
crushers used for breaking of any type of
furnace and stream material with high
hardness and silica rate. GM - 03 and GM -
07 - GM - 11 types of jaw settings and joint
plate changes are made with the help of a
mechanical system, the jaws are reversed to
change the reverse. Jaw crushers are the
most preferred primary crushers. Operating
cost is low and all spare parts can be
supplied by us. The material obtained from
stone quarries or stream beds is the most
preferred crusher type that compresses
between two jaws, one fixed and the other
moving (16-18 mn). The moving jaw crushing
operation is supported by the eccentric
drive shaft on the heavy duty bearings and
supported by the safety plate and the jaw
crusher body. The moving jaw moves up and
down by drawing an ellipse close to the
circle in the feeding mouth and a narrow
ellipse close to the straight line in the
exit zone. This mode of operation allows the
material to be grasped above the ground, and
below it, by accelerating, leaving the
outlet and therefore the material flow. Jaw
crushers are used to break the primary type
of large stones and as a secondary crusher
can be preferred to obtain fine material.
The material feed opening is relatively
narrower than the other type of primary
breakers
.
. |